15
En
Date/time setting
1 Set the mode dial to , then press the POWER switch to turn on
the camera.
2 Press .
● The monitor turns on automatically and the top menu appears.
3 Press ñ on the arrow pad to select .
4 When is selected on the
screen, press
Ññ to select the date format.
● Select any one of the following formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the procedure used when the
date and time settings are set to Y-M-D.
5 Press í to move to the year setting.
6 Press Ññ to set the year. When the year is set, press í to move to
the month setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
É.
● The camera can only display the time in “consecutive hours,” or what is
commonly known as military time. For example, 2:00 p.m. would 14:00
hours — in other words, 12 hours + 2 hours = 14:00 hours.
● The first two digits of the year cannot be changed.
Power on/off
1 Before turning the camera on, press the tabs
on the lens cap in the direction of the arrows
and pull the cap off to remove it.
2 Press the POWER switch to turn on the
camera.
● The lens moves out when the mode dial is set
to any position other than .
● The viewfinder turns on.
3 Press the POWER switch again to turn the
camera off.
Lens cap
POWER switch
To Next Page
Loading...
