Olympus CAMEDIA C-730 Ultra Zoom - Page 16

16
GETTING STARTED (Cont.)
En
7 Press .
● For the most accurate possible setting, press when the time is
actually at 00 seconds. The camera’s built-in clock starts when you
press .
8 To turn the camera off, press the POWER switch.
● The lens retracts.
● The current settings remain the same even when the power is turned off,
unless they are readjusted.
● The date setting will be canceled if the camera is left with no batteries for
approximately 1 hour. If this happens, you will need to set the date again.
Note
● The current settings remain even when the power is turned off, unless they
are readjusted.
Note
Selecting a language
1 Set the mode dial to P, then press the POWER switch.
2 Press .
● The monitor turns on automatically and the top menu appears.
3 Press í on the arrow pad to select MODE MENU.
4 Press Ññ to select SETUP, then press í.
● The items in the SETUP menu appear.
5 Press Ññ to select , then press í.
● The available languages are displayed.
6 Press Ññ to select a language. Press .
● The camera returns to the SETUP menu.
● If is pressed again, the menu will disappear.
7 To turn the camera off, press the POWER switch.
● The lens retracts.
Factory default setting: ENGLISH