4. Erasing Photos
Photos should be erased from the smart card using the camera, not the
computer. Deleting photos from the smart card folder in the computer
confuses the camera and creates formatting problems. There are two ways
to erase photos: one frame at a time or all frames at once.
One Frame Erase - With the lens cover closed,
1. Press the green on/off monitor button. Use the +/- to display the
desired photo.
2. Use the +/- buttons to select “Yes”.
3. Press the OK button.
All Frame Erase - With the lens cover closed,
1. Press the green on/off monitor button on the back of the camera.
2. Press the Erase Button and hold. While holding down the Erase
button, press the Flash Button.
3. Click OK button.
4. All photos will erase.
To Next Page
Loading...
