Olympus E-PM1 Basic Manual

7 EN
EN
Attaching the fl ash unit
1
Remove the terminal cover from the fl ash unit and attach the fl ash to the
camera.
Slide the fl ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
2
1
UNLOCK switch
2
To use the fl ash, raise the fl ash head.
Lower the fl ash head when the fl ash is not in use.
Removing the Flash Unit
Press the UNLOCK switch while removing the
fl ash unit.
2
1
UNLOCK switch
•
•
S0039BasicUA.indb7S0039BasicUA.indb7 2011/07/019:02:212011/07/019:02:21

Olympus E-PM1 Specifications

General

Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm
Effective Pixels	12.3 MP
Screen Size	3.0 inches
Screen Resolution	460, 000 dots
Image Stabilization	Sensor-shift
Weight	217 g (body only)
Camera Type	Mirrorless
Continuous Shooting	5.5 fps
Focus Points	35
Built-in Flash	Yes
Storage Media	SD/SDHC/SDXC card
Battery	BLS-5 lithium-ion battery
ISO Range	ISO 200-12800
Video Recording	1920 x 1080 (Full HD)
Shutter Speed	60 sec to 1/4000 sec
Video Format	Motion JPEG
Autofocus System	Contrast Detect (sensor)