18
En
Use the video cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the video cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3 Press the q button to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad (O/N/X/Y) to select
the picture you want to display.
CONNECTING THE CAMERA
Playback on a TV
Video cable
Multi-Connector
Connector cover
Connect to the TV’s video
input (yellow) terminal.
d4310_e_basic_00_bookfile.book Page 18 Thursday, January 5, 2006 11:30 AM
To Next Page
Loading...
Need help?
General
