Menu operations
22
EN
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master
software on the provided CD-ROM. An Olympus xD-Picture Card is required for panorama
shooting.
Use the arrow pad to specify at which edge you want to connect the pictures; and then
compose your shots so that the edges of the pictures overlap. The part of the previous
picture where it will be joined to the next picture does not remain in the frame. You have to
remember what the part in the frame looked like and take the next picture so it overlaps.
•Press to exit.
• Panorama shooting is possible for up to 10 pictures. The warning mark (g) is displayed
after 10 pictures have been taken.
The camera searches for a face within the frame and focuses on it.
• A face may not be detected depending on the subject.
R (movie) ................................................................ Recording movies with or without sound
OFF
/ON
When [ON] (sound is recorded) is selected, the optical zoom
cannot be used during movie recording. Only the digital zoom can
be used.
PANORAMA............................................................................... Creating a panoramic picture
FACE DETECT........................................................................................... Focusing on a face
OFF /ON
SILENT MODE Muting operational sounds
OFF /ON
This function allows you to mute operational sounds during
shooting and playback (e.g. warning beeps, shutter sounds, etc.).
Connects pictures from left to right Connects pictures from bottom to top
Y: The next picture is
connected at the right
edge.
X: The next picture is
connected at the left
edge.
O: The next picture is
connected at the top.
N: The next picture is
connected at the
bottom.
5
d4368_e_0000_7.book Page 22 Friday, November 30, 2007 3:16 PM
To Next Page
Loading...
Need help?
General
