Menu operations
EN 27
The factory default settings differ according to the region where the camera is sold.
• TV video signal types by country/region. Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
VIDEO OUT .................................................................... Playing back pictures on a TV
NTSC / PAL
Connect to the TV's video
input terminal (yellow).
Video cable (provided)
Connector cover
Settings on the TV
Turn the TV on, and set it to video input
mode.
• For details of switching to video input,
refer to your TV’s instruction manual.
• Images and the information
displayed on the screen may be
cropped depending on the TV’s
settings.
Settings on the camera
Turn on the camera and then press q
to enter playback mode.
• The last picture taken is displayed on
the TV. Use the arrow pad to select
the picture you want to display.
VIDE
UT jack
To Next Page
Loading...
Need help?
General
