Getting to know your camera better
EN 51
When you get an error message on the camera...
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with
the card.
This card cannot be used. Insert a new
card.
q
WRITE-PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer and
cancel the read-only setting.
>
MEMORY FULL
The internal memory has
no available memory and
cannot store any new
data.
Insert a card or erase unwanted data.
Before erasing, backup the data of
important pictures using the card, or
download such pictures to a computer.
q
CARD FULL
The card has no available
memory and cannot store
any new data.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
L
NO PICTURE
There are no pictures in
the internal memory or on
the card.
The internal memory or the card
contains no pictures. Record pictures.
r
PICTURE ERROR
There is a problem with
the selected picture and it
cannot be played back on
this camera.
Use image processing software to view
the picture on a computer. If that cannot
be done, the image file is damaged.
CARD-COVER
OPEN
The battery/card
compartment cover is
open.
Close the battery/card compartment
cover.
g
BATTERY EMPTY
The battery is empty. Insert a new battery. Or, charge it when
using the rechargeable battery.
To Next Page
Loading...
Need help?
General
