89
EN
Menu functions (Shooting menus)
4
Processing options (Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 64 ) settings. Changes to each picture mode are stored separately.
1
Select [Picture Mode] in W Shooting Menu 1 and
press Q.
• The camera will display the picture modes available in
the current shooting and creative dial modes.
j
4:3
D
1
2
Shooting Menu 1
Card Setup
Picture Mode
Image Aspect
Back
Set
Digital Tele-converter Off
j/Y/
Reset/Assign Custom Modes
2
Select an option with FG and press Q.
• Press I to view details for the highlighted option. Details are not available for some
options.
• Changes to contrast have no effect at settings other than [Normal].
% Tips
• You can reduce the number of picture mode options displayed in the menu.
g [Picture Mode Settings] (P. 107)
Image quality (K)
Select an image quality. You can select a separate image quality for photographs and
movies. This is the same as the [K] item in LV super control panel. g “Selecting
image quality (still image quality mode)” (P. 59), “Selecting image quality (movie image
quality mode)” (P. 60)
• You can change the JPEG image size and compression ratio combination, and [X] and
[W] pixel counts. [K Set], [Pixel Count] g “Combinations of movie image sizes and
compression rates” (P. 126)
• You can change the combination of movie compression format/frame rate, the shooting
time of movie clips, and the effect of slow/quick motion shooting. g “Movie Specifi cation
Settings” (P. 112)
To Next Page
Loading...
