81
EN
Copying pictures to a computer
Your camera supports the USB Mass Storage Class. You can transfer
images to a computer by connecting the camera to the computer with the
provided USB cable. The following operating systems are compatible with
the USB connection:
Windows
Windows XP SP3 /Windows Vista SP2 / Windows 7 SP1 /
Windows 8 / Windows 8.1
Macintosh Mac OS X v10.5-v10.9
1
Turn the camera off and connect it to the computer.
• The location of the USB port varies with the computer. For details, refer to
your computer’s manual.
2
The computer recognizes the camera as a new device.
If your computer is running Windows Vista / Windows 7 / Windows 8 /
Windows 8.1, select [MTP] in [USB Connection] of the setting menu to use
Windows Photo Gallery.
Data transfer is not guaranteed in the following environments, even if your
computer is equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
Camera controls can not be used while the camera is connected to a
computer.
If the dialog is not displayed when the camera is connected, set [USB
Connection] (P. 63) of the setting menu before connecting to PC again.
To Next Page
Loading...
