16
EN
Before Using GPS
The camera’s GPS (Global Positioning System) feature
determines your position (latitude and longitude) and
stores this information with pictures taken with the
camera.
The camera uses supplementary orbital data (assisted
GPS or A-GPS) for improved signal acquisition.
A-GPS data must be updated every 14 days.
Before using GPS, you will need to set the camera clock
to the correct date and time. (p. 15)
Updating A-GPS Data
1
Install the update software (OLYMPUS A-GPS
Utility).
●
Download the update software from the following
website and install it on your computer.
http://sdl.olympus-imaging.com/agps/
2
Connect the camera to the computer and
launch the update software.
“Connecting the camera” (p. 12)
Once the software has started, follow the on-screen
instructions.
Using GPS
1
Select [On] for [GPS Settings] > [GPS] in the
x (Settings Menu 3) tab.
“Setup menu” (p. 8)
●
Once the camera has determined the position, G
and location coordinates will appear in the display.
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
44
N
ORM
16
M
GPS
H
Blink: Searching GPS signal
G
Light: Receiving GPS signal
The camera may take a few minutes to determine
position after a period of disuse.
If the icon is still fl ashing after several minutes,
the camera is probably having diffi culty detecting
a signal. Move to an unobstructed outdoor area or
otherwise change your location.
To Next Page
Loading...
