Olympus SH-25MR - Rotating images []; Capturing still images from movies [In-Movie Image Capture]

48
EN
For information on using the menus, see “Setup menu” (p. 8).
1 Select the image using HI, and press the A button.
● If the target landmark is at a distance from the
position recorded on the images, it may not be
displayed.
● A list of the landmarks registered near the position
recorded on the images are displayed.
2 Select the new landmark to be recorded on the image
using FG, and press the A button.
3 Select [OK] using FG, and press the A button.
Rotating images [
Rotating images [
y
y
]
]
q (Playback Menu) X Edit X y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
Capturing still images from movies
Capturing still images from movies
[In-Movie Image Capture]
[In-Movie Image Capture]
q (Playback menu) X Edit X
In-Movie Image Capture
1 Use HI to select the movie and press the A button.
2 Use HI to display the frame to be captured and
press the A button.
● The selected frame is recorded as a still image.
Trimming long movies
Trimming long movies
[Movie Trimming]
[Movie Trimming]
q (Playback Menu) X Edit X
Movie Trimming
1 Use HI to select the movie and press the A button.
Submenu 2 Application
New File
Records the trimmed movie as new
movie fi le.
Overwrite
Overwrites the original movie with
the trimmed movie.
2 Use HI to display the frame to start erasing, and
then press the A button.
3 Use HI to display the frame to end erasing, and then
press the A button.
4 Use FG to select [Erase] and press the A button.
● To cancel trimming, select [Cancel].
Movie trimming is processed by seconds. The movie
length is automatically adjusted so that the selected
start and end frames are included.
When editing movies in a group
When editing movies in a group
1 Expand the desired group.
"Playing back grouped images" (p.38)
2 Use HI to select the movie and press the A button.
● When you perform trimming on the group which
includes two movies without expanding it, both
movies are edited.
● When you expand the group to edit respective
movie, the edited movie can be saved respectively
as [New File].