36
EN
Dot Sight
You can use this unit when shooting objects at telephoto side to assist
framing.
When shooting with high magnification, you can easily find and set the
object in the frame.
1
Slide the dot sight switch to raise the dot sight.
Dot sight switch
Dot Sight
2
Looking through the dot sight from the back, align the target
mark with the object.
• If looking through at an angle, the target mark may be difficult to see.
Target mark (red)
3
Confirm composition through the back monitor or viewfinder
(EVF) and shoot.
• Use the dot unit as a guide for framing.
• The dot sight does not light up when shooting is not available (e.g. when
playing back images).
• The camera was unable to focus if the target mark blinks.
To Next Page
Loading...
