© 2006
Printed in Japan
1AG6P1P3138-- VH683701
Pull the strap tight so that it does not come loose.
For details on inserting an optional xD-Picture Card (hereinafter called
the card), please refer to the Advanced Manual.
This explains how to turn on the camera in shooting mode.
a. Set the mode dial to h.
Still picture shooting modes
b. Press the o button.
To turn off the camera, press the o button once again.
Quick Start Guide
SP-510UZ
Start Here
For more information, please refer to the Basic & Advanced Manuals
or visit: www.olympusamerica.com/support
Gather these items (box contents)
Digital Camera Lens Cap/Lens Cap
String
Strap
AA Batteries
(four)
USB Cable AV Cable OLYMPUS Master
Software CD-ROM
Items not shown: Advanced Manual, Basic Manual and warranty card.
Contents may vary depending on purchase location.
Attach the strap and the lens cap
Strap Eyelet
·Attach the strap to the other
eyelet in the same manner.
3
1
2
4
1
2
3
7
6
5
4
Prepare the battery
h Allows you to take pictures with full automatic settings.
P The camera automatically sets the optimum aperture value and shutter speed.
A/S Allows you to set the aperture manually. / Allows you to set the shutter speed
manually.
M Allows you to set both the aperture and shutter speed manually.
r
Allows you to set each shooting function manually and use as your original
shooting mode.
g Allows you to set the target items by following the shooting guide displayed
on the screen.
s Allows you to shoot pictures by selecting a scene according to the shooting
condition.
Turn the camera on
When shooting movies
Shooting mode
·To turn on the camera, press the POWER
button after removing the lens cap.
MENU
CANCEL
X
Y/M/D
·This is displayed when
the date and time are
not set.
a. Press the sF button and the r QUICK VIEW
button to select [Y].
• The first two digits of the year are fixed.
b. Press the q# button.
c. Press the sF button and the
r QUICK VIEW button as in a. to
select [M].
d. Press the q# button.
e. Press the sF button and the
r QUICK VIEW button to select [D].
f. Press the q# button.
g. Press the sF button and the
r QUICK VIEW button to select
“hour”, “minute”.
• The time is displayed in the 24-hour format.
h. Press the q# button.
i. Press the sF button and the
r QUICK VIEW button to select [Y/
M/D].
j. After all items have been set, press
the o button.
• For precise time setting, press the o button as the time signal strikes 00
seconds.
a. Hold the camera.
c. Shoot
a. Set the mode dial to q.
a. As described in a. above, display the picture you
want to erase.
b. Press the Y/S button.
c. Press the sF button to select [YES], and press the
o button to erase the image.
Set date and time
About the date and time setting screen
MENU
CANCEL
X
Y/M/D
]
44
[ ]
The green lamp indicates the
focus and exposure are locked.
Place this mark over your subject.
The number of storable
still pictures is displayed.
(Pressed
completely)
Shutter Button
The card access lamp blinks.
View pictures
12:30
Need help?
General
