32
EN
Selecting the method for measuring
the brightness [ESP/n]
I (Shooting menu 1) X ESP/n
Available shooting modes:P
M s P
A Q
Submenu 2 Application
ESP
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the
center and surrounding areas of
the screen separately).
5 (spot)
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
E
(center
weighted)
Shoots without being affected
by the surrounding brightness.
(Meters a wide range based on the
center section of the screen.)
When set to [ESP], the center may
appear dark when shooting against strong
backlighting.
[5(spot)] can be selected when [SHADOW
ADJUST] is set to [OFF], or when [AF
MODE] is set to [SPOT].
Shooting at higher magnifi cations than
optical zoom without reducing the
image quality [FINE ZOOM]
I (Shooting menu 1) X FINE ZOOM
Available shooting modes:P
M s P
A Q
Submenu 2 Application
OFF
Optical zoom is used to zoom in
for shooting.
ON
Optical zoom and image cropping
are combined to zoom in for
shooting. (Approx. 201x (max.))
This function will not reduce the image
quality since it dose not convert the data
with fewer pixels into the data with larger
pixels.
When set to [ON], [IMAGE SIZE] is limited
to [4] or lower.
The setting is not available when [DIGITAL
ZOOM] is set to [ON].
[FINE ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
Shooting at higher magnifi cations than
optical zoom [DIGITAL ZOOM]
I (Shooting menu 1) X DIGITAL ZOOM
Available shooting modes:P
M s P
A Q
Submenu 2 Application
OFF
Only optical zoom is used to zoom
in for shooting.
ON
Optical zoom and digital zoom
are combined to zoom in for
shooting.(Approx. 150x (max.))
The setting is not available when [FINE
ZOOM] is set to [ON].
[DIGITAL ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
To Next Page
Loading...
