Olympus Stylus 1040 - Page 39

39 EN
6 Use FD to select an image.
7 To make a [SINGLEPRINT]
reservation for the current image,
press the < button.
To make detailed settings for the
current image, press
E.
To make detailed settings
1 Use CEFD to make the settings,
and press the x button.
PRINT INFO
< x
DATE
FILE NAME
1
WITHOUT
WITHOUT
MENU
EXIT SET
OK
Submenu 5 Submenu 6 Application
<×
0 to 10
This selects the number
of prints.
DATE
WITH/
WITHOUT
Selecting [WITH] prints
the images with the date.
Selecting [WITHOUT]
prints the images without
the date.
FILE NAME
WITH/
WITHOUT
Selecting [WITH] prints
the fi le name on the
image.
Selecting [WITHOUT]
does not print any fi le
name on the image.
8 If necessary, repeat Steps 6 to 7
to select the image to be printed,
make the detailed settings, and set
[SINGLEPRINT].
9 Press the x button.
PRINT
SET
OK
MENU
BACK
PRINT
CANCEL
10 Use CE to select [PRINT], and
press the x button.
Printing starts.
Selecting [OPTION SET] in [ALL PRINT] mode
displays the [PRINT INFO] screen.
When printing is fi nished, the [PRINT MODE
SELECT] screen is displayed.
ALL PRINT
PRINT MODE SELECT
SET
OK
ALL INDEX
PRINT ORDER
MULTI PRINT
PRINT
EXIT
MENU
To cancel printing
1 Press the x button while [TRANSFERRING]
is displayed.
2 Use CE to select [CANCEL], and then
press the x button again.
11 Press the m button.
12 When the message [REMOVE USB
CABLE] is displayed, disconnect
the USB cable from the camera and
printer.
●
●
●
PRINT
SET
OK
CONTINUE
CANCEL
CANCEL
OK
TRANSFERRING
d4377_e_oima_000_book_cs2e.indb 39d4377_e_oima_000_book_cs2e.indb 39 7/1/2008 12:09:07 PM7/1/2008 12:09:07 PM