2
Use~:n
to
select
[ON], and
press
the
@
button
to
set.
2
Use~:n
to
select
the
setting
option,
and
press
the
@
button
to
set.
Adjusting
the
brightness
ltgxpo~yre
cqmlJfi!!!!!atignL·
3
Point
the
camera
toward
the
subject.
Check
the
frame
appearing
around
the
face detected
by
the
camera, and then
press
the
shutter
button
to
take
the
picture.
For some subjects, the frame may not
appear or may take some time to appear.
1.
When set to [ON],
[ESP/C!J]
(p. 30) is
automatically fixed to [ESP], and
[AF
MODE] (p. 31) is automatically fixed to
[FACE DETECT].
FLASH AUTO
REDEYE
FILL
IN
FLASH OFF
The flash fires automatically
in
low-light or backlight conditions.
This emits pre-flashes
to
reduce
the occurrence
of
red eye
in
your
photos.
The flash fires regardless of the
available light.
The flash does not fire.
The flash functions can be selected to best
match the shooting conditions and render the
desired image.
1 Press
the
~
button.
"
You
can operate the camera by tapping the
body when [TAP CONTROL] is [ON).
[TAP CONTROL]
(p. 48)
The standard brightness (appropriate exposure)
can be adjusted brighter or darker to obtain the
desired shot.
1 Press
the
IB
button.
Exposure compensation value
2 Use,D;\
~~:n
to
select
the
desired
brightness
image, and press
the
@
button.
EN
To Next Page
Loading...
