To
adjust the CCO and to adjust the
image processing function
Press the @ button when [START]
(submenu 2) is displayed.
•
The
camera checks
and
adjusts
the
CCO
and
the
image processing function
at
the
same
time.
Adjusting the CeD
and
adjusting the
image processing function
[PIXEL MAPPING]
..
J!?ET':Jg~.::f>IXEL,.f'v1APgIA~q
o This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping.
If
the camera is
turned off during pixel mapping, be sure to
perform it again.
.jpg
File name
Pmd
Folder name
Pmdd .jpg
I
!
~
Automatic IAutomatic
numbering .
--.J numbering
r
r-
Month: 1 to C
l
L__
(A=October,
P~
~:~~~:~~:~)
L Day:
01
to
31
Folder name
DCIM
(;J
Resetting the file name numbers
of
pictures [FILE NAME]
VTSETUI?
~.
FILE
NAME,"
,..
,.
"
..
.
RESET]
This resets the sequential number
for the folder name and file name
whenever a new card is inserted:'
This is useful when grouping
images
on
separate cards.
AUTO
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
., The number for the folder name
is
reset to 100, and
the one for the file name is reset to 0001.
To Next Page
Loading...
