Using
the
LEDillumi"ator;
y_
In
a dark location, the LED illuminator can
be used as an auxiliary light to see things or
compose shots.
1 Set [LED ILLUMINATOR] (p. 47)
to
[ON].
Changing
the
shooting
infoT'!J8,tioq
.d!splay,
The display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
1 Press
the
DIS~
button.
•
The
displayed shooting information changes
in
the
order
shown
below each time
the
button
is
pressed. "Shooting mode
display"
(p.
8)
Reading a
histogram
2 Press
and
hold
the
.~
button
down
until
the
LED
illuminator
lights
up.
• If
you
perform
an
operation when
the
LED
illuminator
is
on,
it
will illuminate up
to
approx.
90
seconds.
LED illuminator
o
OLYMPUS
The LED illuminator turns off
if
no operation
is performed for approx. 30 seconds.
~
Even when the camera's power is turned
off,
if
the lens barrier is opened, the LED
illuminator lights for 30 seconds.
To
turn
the
LED
illuminator
off
Press and hold the
.~
button down, until the
LED illuminator turns off.
Normal
..
No information
Histogram
...
Grid
If the peak fills too much
of
the frame,
the image will appear mostly white.
If the peak fills too
much
of
the frame,
the image will
appear mostly black.
The green section shows
the luminance distribution
in
the
center area of the monitor.
To Next Page
Loading...
