ng
OLYMPUS
Master
2
System
requirements
and
installation
of
OLYMPUS
Master
~_
.~
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting
the
camera
to
a
comRut~r;,
1 Make sure the camera is turned off.
•
The
monitor
is
off.
2 Connect the camera to a computer.
•
The
camera automatically turns
on.
(fJ Locate the position
of
the USB port by
referring to your computer's instructions
manual.
3 Use
~~
to select [PC], and press
the
@ button.
• The computer automatically detects
the
camera
as
a
new
device
on
the
first connection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera
is
recognized as a
removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master
2.
" While the camera is connected to the
computer, shooting functions are disabled.
• Connecting the camera to a computer via a
USB hub may cause unstable operation.
0) When [MTPj is set for the submenu that
appears by pressing
nafter selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master
2.
1 Double-click the OLYMPUS Master 2
icon
•.
Windows
• appears on the desktop.
Macintosh
.~
appears
in
the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
t1J
When you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screens appear. Follow
the instructions on the screen.
To Next Page
Loading...
