EasyManua.ls Logo

Olympus STYLUS 1s - Shooting Using Basic Functions (continued); Time-Lapse Shooting

Olympus STYLUS 1s
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
EN
Shooting using basic functions
3
Shooting automatically with a fixed interval (time lapse shooting)
You can set the camera to shoot automatically with a set time lapse. The shot frames
can also be recorded as into a single movie. Before starting interval timer photography,
use the [Interval Shooting] option in Shooting Menu 2 (P. 53) to choose the interval and
number of shots. See “Setting shooting functions” (P. 46) for information on using the
shooting menu.
1
Rotate the mode dial to SCN.
2
Use FG to select [Interval Shooting] and press Q.
3
Shoot.
Frames are shot even if the image is not in focus after AF.
[Rec View] (P. 61) operates for 0.5 seconds.
If a value of 1 minute 31 seconds or higher is selected for [Start Waiting Time] or
[Interval Time], the monitor will turn off after 1 minute and the camera will enter
sleep mode. The camera will automatically reactivate 10 seconds before a shot is
taken. You can also reactivate the camera by pressing the ON/OFF button while the
monitor is off.
# Cautions
During interval timer photography:
- The camera focuses using [S-AF] autofocus
- Sequential shooting can not be used
- Touch-screen controls are not available
- Bulb photography and bracketing can not be used
Depending on the time needed to charge the flash or process pictures after shooting,
photographs may be taken at intervals longer than selected.
If the camera automatically turns off in interval between shots, it will turn on in time for the
next shot.
If the any of the still pictures are not recorded correctly, the time lapse movie will not be
generated.
If there is insufficient space on the card, the time lapse movie will not be recorded.
The following end interval timer photography:
Rotating the mode dial / Pressing the MENU or q button / Connecting a USB cable
If you turn off the camera, time lapse shooting will be cancelled.
If there is not enough charge left on the battery, the shooting may end partway through.
Make sure the battery is suitably charged before starting.

Related product manuals