30
EN
Shooting using various functions
4
Single/Sequential
1
Press the jY button (G) to display the direct menu.
2
Select [o] or [j] using HI and press the Q button.
o
Single-frame shooting
Shoots 1 frame at a time when the shutter button is
pressed (normal shooting mode).
j
Sequential shooting
Photographs are taken at about 7 frames per
second (fps) while the shutter button is pressed all
the way down.
• During sequential shooting, focus, exposure, and white balance are locked at the first frame.
• During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
Bracketing (BKT)
While the shutter button is pressed all the way down, photographs are taken with
automatically changing the settings for each frame (bracket photography).
1
Press the jY button (G) to display the direct menu.
2
Select [Bracketing] using HI and press the Q button.
• Bracketing is available only when [Bracketing] (P. 51) is selected.
AF target
You can select the focus target manually. Normally the camera automatically chooses
from the 35 of focus targets.
1
Press the P button (H) to display the AF target.
2
Use FGHI to move the green border to the focus point.
All Targets Single Target
The camera automatically
chooses from the full set of
focus targets.
Select the focus target
manually.
• When you move the cursor off the screen, “All targets” mode is restored and the
camera automatically chooses from the 35 of focus targets.
• While using the digital tele-converter, AF targets decrease to 9 targets.
Small and Group Targets
To choose the target type, press the INFO button while AF targets are displayed.
Group target
Select 9 targets from all 35 of them, and let the camera automatically choose from the
targets in the selected area. (According the area, select 6 or 4 targets.)
To Next Page
Loading...
