50
EN
Shooting using various functions
4
Record Mode ( Image quality)
Select an image quality. You can select a separate image quality for photographs and
movies. This is the same as the [Record Mode] (P. 36) item in [Live Control].
• You can change the JPEG image size and compression ratio combination, and [X] and
[W] pixel counts.
[K set], [Pixel Count] g “c Custom Menu” (P. 68)
Image Aspect (Setting the image aspect)
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures.
Depending on your preference, you can set the aspect ratio to [4:3] (standard), [16:9],
[3:2] or [1:1].
# Cautions
• JPEG images are cropped to the selected aspect ratio; RAW images, however, are not
cropped but are instead saved with information on the selected aspect ratio.
• When RAW images are played back, the selected aspect ratio is shown by a frame.
j/Y (Setting custom self-timer)
You can customize the self timer operation.
1
Select [j/Y] in
J
Shooting Menu 2.
2
1
c
Shooting Menu 2
Back Set
Off
#
Sync 1
Bracketing
Interval Settings
#
Sync
j/Y o
#
RC Mode
Off1
Off
Off
Image Stabilizer
2
Select [YC] (custom) and press I.
3
Use FG to select the item and press I.
• Use FG to select the setting and press Q.
Frame Sets the number of frames to be shot.
Y Timer
Sets the time after the shutter button is pressed until the picture
is taken.
Interval Time
Sets the shooting interval for the second and subsequent
frames.
Image Stabilizer (Reducing camera shake)
You can set the image stabilizer to on or off (the same as the image stabilizer of the
live control ).
To Next Page
Loading...
