Olympus STYLUS 1s - Shooting Using Various Functions (continued); Remote Flash, Sync, Conversion Lens, and Interval Settings

53 EN
Shooting using various functions
4
# Remote Flash (Wireless remote control flash photography)
The built-in flash unit and external flash units that offer a remote control mode and
are designated for use with this camera can be used for wireless flash photography.
Select [On] to set each flash with the camera. g “Wireless remote control flash
photography” (P. 90)
# Sync (Setting the flash timing)
You can set the flash timing. For [# Sync 1], flash fires as shutter opens, while flash
fires just before the shutter closes for [# Sync 2], creating a stream of light behind
moving light sources.
1 (Taking pictures with a conversion lens)
Take pictures using an optional conversion lens. When using a conversion lens, be
sure to choose the appropriate option.
Off Select when taking pictures without a conversion lens.
TCON-17 Take pictures using a teleconversion lens (TCON-17X). Requires a CLA-13
conversion lens adapter.
WCON-08X Take pictures using a wide conversion lens (WCON-08X). Requires a
CLA-14 conversion lens adapter. Zoom is restricted to wide angles. The AF
illuminator will not light.
# Cautions
• Before attaching or removing conversion lenses, be sure that the camera is off.
• After removing the automatic lens cap, attach the conversion lens adapter.
g “Automatic lens cap” (P. 3)
• The following restrictions apply when a conversion lens is attached:
- The camera may take time to focus
- The built-in flash may not light the entire subject (the shadow of the conversion lens
may appear in photographs)
- Step zoom (P. 70) can not be used
Interval Settings (Adjusting Interval Timer Settings)
Adjust interval timer photography settings, including the interval and number of shots.
g ”Shooting automatically with a fixed interval (time lapse shooting)” (P. 23)
1
Perform the following settings under [Interval Settings] in
J
Shooting
Menu 2.
• See “Setting shooting functions” (P. 46) for information on using the shooting menu.
Frame Sets the number of frames to be shot. The maximum is 999.
Start Waiting Time Sets waiting time before starting to shot.
Interval Time Sets interval between shots after shooting starts.
Time Lapse Movie Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture and generates and
records a single movie from the frame sequence.
• Time lapse movies are recorded in Motion JPEG format (1280 × 720 pixels, 10 fps).