Olympus STYLUS 1s - Customizing Camera Setting (continued); Shooting Display Information Options

78 EN
Customizing camera setting
9
Choosing the Information Shown in the Shooting Display
The [G/Info Settings] option in the custom menu (P. 72) can be used to choose the
information shown in the display during shooting. Press the INFO button to cycle the
shooting display as follows:
125125 F5.6
ISO
200
L
N
P
01:02:0301:02:03
12341234
HD
+ 2.0 + 2.0
00
250250 F5.6
P
0.00.0
+7+7-3-3
INFO
Level gauge 1 display
INFO INFO
250250 F5.6
P
0.00.0
INFO
Image only
Histogram display
Information display on
L
N
01:02:0301:02:03
3838
F5.6
P
0.00.0
ISO
200
125125
HD
L
N
01:02:0301:02:03
3838
F5.6
P
0.00.0
ISO
200
125125
HD
INFO
INFO
Highlight & Shadow
display
Level gauge 2 display
Level gauge display
Indicate the orientation of the camera. The “tilt” direction is indicated on the vertical bar and
the “horizon” direction on the horizontal bar. Use the indicators on the level gauge as a guide.
If the level gauge does not indicate the orientation correctly, calibrate the angle of the level
gauge. g [Level Adjust] (P. 68)
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. g [Histogram Settings] (P. 68)