86
EN
Connecting the camera to another device
10
Connecting the camera to a computer
Connecting the camera
Smaller
terminal
USB port
Multi-connector
USB cable
# Caution
• When the camera is connected to another device via USB, a message will be
displayed prompting you to choose a connection type. Select [Storage].
• If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
• If the camera does not prompt you to choose a connection type, reconnect the
camera after selecting [Auto] for [USB Mode] in the custom menu T (P. 68).
Installing Software
Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
• A “Setup” dialog will be displayed.
• Microsoft no longer supports Windows XP. Continued
use may threaten your computer’s security; use at your
own risk.
Windows Vista/Windows 7/Windows 8/Windows 8.1
• An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
# Caution
• If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7) from the start menu. Double-click the
CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then
double-click “LAUNCHER.EXE”.
• If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Follow the on-screen instructions on your computer.
To Next Page
Loading...
