17EN
Smoothing out skin tone and
texture (I mode)
The camera fi nds a person’s face and gives the
skin a smooth, translucent look for taking the
picture.
1
Set the mode dial to I.
12
M
4
IN
N
ORM
I mode indicator
2
Point the camera toward the subject.
Check the frame appearing around
the face detected by the camera, and
then press the shutter button to take
the picture.
The unedited image and edited image are both
saved.
If the image cannot be retouched, only the unedited
image is saved.
The frame may not appear or may take some
time to appear for some subjects. In addition,
this function may have no visible effect on
some subjects.
The [IMAGE SIZE] of the retouched image is
limited to [J] or lower.
●
●
This section describes the available shooting
modes. Depending on the mode, some settings
can be changed. For details on the functions
that can be adjusted, see “Menus for Shooting
Functions” on page 25.
Using the best shooting mode
for the scene (s mode)
1
Set the mode dial to s.
PORTRAIT
SET
OK
MENU
EXIT
Press and hold the E button to display a description
of the selected mode.
2
Use kl to select the best
shooting mode for the scene, and
press the E button.
12
M
4
IN
N
ORM
Shooting mode
indicator
To change to another scene mode, use the
menu. [J s] (p. 29)
●
Using Shooting Modes
To Next Page
Loading...
