Olympus Stylus 7030 - Image Viewing Modes and Information Display; Selecting Images in Different Views; Playing Back Panorama Images

20 EN
To select an image in index view
Use FGHI to select an image, and press
the A button to display the selected image
in single-image view.
To scroll an image in close-up view
Use FGHI to move the viewing area.
To select an image in event index
Use HI to select the representative image
and press the A button. The images in the
selected event are played back.
Changing the image
information display
Shooting information settings displayed on the
screen can be changed.
1
Press F (INFO).
The displayed image information changes in
the order shown below each time the button is
pressed.
1010
’10/02/26 12:30’10/02/26 12:30
4/30
4/30
1010
4/304/30
1/1000 F3.0 2.0
AUTO
WB
AUTO
ISO
P
FILE
100 0004
’10/02/26 12:30
N
ORM
14 M
Normal
Detailed
No information
“Reading a histogram” (p. 17)
●
Playing back panorama
images
Panorama images that were combined together
using [AUTO] or [MANUAL] can be scrolled for
viewing.
“Creating panoramic images (p mode)”
(p. 24)
1
Select a panorama image during
playback.
“Viewing images” (p. 18)
’10/02/26 12:30’10/02/26 12:30
4/30
4/30
OK
REPLAY
2
Press the A button.
Current viewing area
To control panorama image playback
Zoom in/Zoom out: Press the A button to
pause playback. Then press the zoom button
to enlarge/shrink the image.
Playback direction: Press FGHI to
pause playback and scroll the image in the
direction of the pressed button.
Pause: Press the A button.
Restart scrolling: Press the A button.
Stop playback: Press the m button.