18
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press the < button.
Printing starts.
When printing is finished, disconnect the USB
cable from the camera with the picture selection
screen displayed.
Direct Printing (PictBridge)
USB Cable
Multi-Connector
< button
OK
PC / CUSTOM PRINT
EASY PRINT START
d4302_03_basic_EU_e.book Page 18 Monday, December 19, 2005 5:38 PM
To Next Page
Loading...
