13
Button operations
1
Press the 1F button in shooting mode to adjust the
exposure.
• Adjustable from - 2.0EV to +2.0 EV
In playback mode, select the picture you want to erase, and press the S button.
• Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P. 29)
Shooting mode: Shooting with digital image stabilization mode
This function stabilizes the blur caused by a moving subject or camera
movement when taking pictures. To use this function, press the h/< button in
shooting mode.
• Shooting in a dark environment makes ISO higher, which may increase
electrical noise, causing a rough image.
• By switching to the other mode, most settings will be changed to the default
settings of each mode.
Playback mode: Stabilizing the recorded digital image
If the recorded digital image has any blur incurred by camera movement, the
image will be stabilized and saved as a new one. Press the h/< button in the
playback mode and press the o button.
• Pictures shot by the camera other than this camera or pictures edited by the
PC cannot be fixed.
When the printer is connected to the camera, display a picture to be printed out
in playback mode, and press the h/< button.
g“EASY PRINT” (P. 41)
a 1F button Changing picture brightness
b S button Erasing pictures
c h/P button Stabilizing digital image /Printing pictures
h Stabilizing digital image
< Printing pictures
Ĭ
ġ
ijįı
OK
SET
P
Ĭġ
ijįı
Activate the setting
contents.
3: Brighten
4: Darken
To Next Page
Loading...
