Olympus Stylus 830 - Custom Print Settings

Printing pictures
EN 39
3 Press q/<.
• Printing starts.
• When printing is finished, the picture selection screen is
displayed. To print another picture, press 43 to select a
picture, and press q/<.
• When you are finished, disconnect the USB cable from the
camera with the picture selection screen displayed.
4 Disconnect the USB cable from the camera.
5 Disconnect the USB cable from the printer.
1 Follow Steps 1 and 2 on P. 38 to display the screen for Step 3 above, and
then press e.
2 Select [CUSTOM PRINT], and press e.
3 Follow the operation guide to adjust print settings.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With
the camera turned off or in shooting mode, connect the USB cable. The selection screen for
the USB connection is displayed. Select [EASY PRINT].
g “EASY PRINT” Step 3 (P. 39), “CUSTOM PRINT” Step 2 (P. 39)
Other print modes and print settings (CUSTOM PRINT)
PC / CUSTOM PRINT
EASY PRINT START
OK
PRINTEXIT
OK
SET
USB
[]
PC
EASY PRINT
CUSTOM PRINT
EXIT
Operation guide
d4357_e_0000_72.book Page 39 Monday, July 30, 2007 10:01 AM