17
En
Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer to make prints.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press q/<.
Printing starts.
When printing is finished, disconnect the USB cable
from the camera with the picture selection screen
displayed.
Direct Printing (PictBridge)
USB cable
Multi-connector
Connector cover
OK
PC
/
CUSTOM PRINT
EASY PRINT START
d4361_basic_e_00.book Page 17 Friday, November 2, 2007 1:24 PM
To Next Page
Loading...
