Button operations
16
EN
Press q in shooting mode to switch to playback mode and display the last picture taken.
Press q again or press the shutter button halfway to return to shooting mode.
g “q Viewing still pictures/Selecting playback mode” (P. 12)
When a printer is connected to the camera, display the picture you want to print in playback
mode and press <.
g “EASY PRINT” (P. 36)
Press in shooting mode. The monitor will be set to the brightest state set in [s] for 10
seconds.
g “s Adjusting the brightness of monitor” (P. 32)
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g “0 Protecting pictures” (P. 29)
q/< button Viewing pictures/Printing pictures
q Viewing pictures immediately
< Printing pictures
/S button Increasing the brightness of the monitor/Erasing pictures
Increasing the brightness of the monitor
S Erasing pictures
c
d
d4328_e_0000_7.book Page 16 Friday, December 15, 2006 10:47 AM
To Next Page
Loading...
