23
En
Taking still pictures
The following section describes how to take pictures using the monitor.
For details regarding the display on the monitor, please refer to the
Advanced manual (CD-ROM).
Set the mode dial to K,
then press the POWER
switch.
When power is turned on, the
lens barrier opens, the lens
extends, and the monitor turns
on automatically.
P
a
2272*1704
(
#
e
AF target mark
Green lamp
Flash stand-by/flash charging
Monitor
000e_kisohen.book Page 23 Friday, July 30, 2004 7:06 PM
To Next Page
Loading...
