26
EN
ISO sensitivity Sets the ISO sensitivity.
l
ISO Auto The camera automatically sets the sensitivity with priority on image quality.
m
High ISO
Auto
The camera automatically sets the sensitivity with priority on minimizing blur caused
by a moving subject or by camera shake.
Q to P
Value Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o
Single One frame is shot each time the shutter button is pressed.
Sequential 1 The camera takes sequential shots at approximately 1.5 frames/sec.
Sequential 2 The camera takes up to 3 sequential shots at approximately 3 frames/sec.
c
High-Speed1 The camera takes up to 28 sequential shots at approximately 10 frames/sec.
d
High-Speed2 The camera takes up to 28 sequential shots at approximately 30 frames/sec.
Image size Sets the number of recording pixels.
4608×3456 Suitable for printing pictures over A3 (11×17 in.).
4
3200×2400 Suitable for printing pictures up to A3 (11×17 in.).
3
1920×1440 Suitable for printing pictures up to A4 size (8.5×11 in.).
7
640×480 Suitable for using pictures on emails.
Aspect Sets the horizontal-to-vertical ratio of images.
u
4:3
Change the horizontal-to-vertical ratio when taking pictures.
v
16:9
w
3:2
x
1:1
● In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 65).
● Examples of image size when the aspect ratio is 4:3.
To Next Page
Loading...
