19
EN
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
1
Press F (INFO).
●
The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 4)
PP
N
ORM
PP
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
N
ORM
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
00:3400:34
720
00:3400:34
720
00:3400:34
720
N
ORM
PP
44
Normal
Movie information
No information
Detailed
Reading a histogram
If the peak fi lls too much of the frame, the
image will appear mostly white.
If the peak fi lls too much
of the frame, the image
will appear mostly black.
The green section shows luminance distribution within
the screen’s center.
Using the fl ash
The fl ash functions can be selected to best match the
shooting conditions.
1
Slide the fl ash switch to raise the fl ash.
To turn off the fl ash
Press the fl ash down back into the camera.
2
Select the fl ash option in the function menu.
0.00.0
MENUMENU
16
M
Flash Auto
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
3
Use HI to select the setting option, and
press the A button to set.
Option Description
Flash Auto
The fl ash fi res automatically in low-light
or backlight conditions.
Redeye
Pre-fl ashes are emitted to reduce the
occurrence of red eye in your photos.
Fill In
The fl ash fi res regardless of the
available light.
Flash Off The fl ash does not fi re.
To Next Page
Loading...
