69
EN
3
Press I.
• The picture selection screen appears when printing is completed. To print
another picture, use HI to select the image and press Q.
• To exit, unplug the USB cable from the camera while the picture selection
screen is displayed.
Custom printing
1
Connect the camera to the printer using the supplied USB
cable and turn the camera on.
• When the camera is turned on, a dialog should
be displayed in the monitor prompting you
to choose a host. If it is not, select [Print] for
[USB Connection] (P. 58) in the setting menu.
2
Follow the operation guide to set a print
option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as
shown below.
Print Prints selected pictures.
All Print
Prints all the pictures stored in the card and makes one
print for each picture.
Multi Print
Prints multiple copies of one image in separate frames
on a single sheet.
All Index Prints an index of all the pictures stored in the card.
Print Order
Prints according to the print reservation you made (P. 72).
If there is no picture with print reservation, this is not
available.
MENU
BackPrint Mode Select
Print
All Print
Multi Print
All Index
Print Order
To Next Page
Loading...
Need help?
General
