13
EN
Connecting the camera
AC outlet
USB cable
(supplied)
Battery/card/
connector cover
Multi-
connector
TG-820 TG-620
Indicator lamp
TG-820 TG-620
Indicator lamp
On: Charging
Off: Charged
The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 3 hours).
If the indicator lamp does not light, the USB-AC
adapter is not connected to the camera correctly,
or the battery, camera, or USB-AC adapter may be
broken.
When to charge the batteries
When to charge the batteries
Charge the battery when the error message shown below
appears.
Battery Empty
Error message
Flashes in red
To Next Page
Loading...
