27
EN
Submenu 1 Description
Auto
The user only composes the
shots so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
Manual
After shooting the fi rst frame, move
the camera to overlap the subject
with the image in the monitor. Then
manually release the shutter.
Depending on the subject or the situation (if the
distance between the camera and subject is too
short), the image may not look 3D.
The 3D viewing angle varies depending on the
subject, etc.
To exit 3D shooting mode without saving an image,
press the button.
The [Image Size] (p. 33) is fi xed to [0].
The zoom ratio is fi xed.
The focus, exposure and the white balance are fi xed
when the fi rst image is taken.
The fl ash is fi xed to [$Flash Off].
Shooting with special effects
(
P
mode)
To add expression to your photo, select the desired
special effect.
1
Set the shooting mode to
P
.
MENUMENU
Magic Filter
0.00.0
AUTO
WB
AUTO
WB
12
M
2
Press G to go to the submenu.
MENUMENU
2 3
Pop Art
0.00.0
AUTO
WB
AUTO
WB
12
M
1
12
3
Use HI to select the desired effect and then
press the A button to set.
0.00.0
AUTO
WB
AUTO
WB
N
ORM
44
00:3400:34
12
M
1
Icon indicating
P
mode
that is set
To Next Page
Loading...
