Olympus WA00014A - Page 65

65
Compatible equipment
O0120.1, A0335.1
* All electrosurgical generators satisfying the interface
requirements can be connected to the HF cable. For non-
Olympus electrosurgical generators, refer to the below interface
requirements.
HF cable Interface requirements for electrosurgical generators
(non-Olympus)
O0120.1 Pin diameter: 4 mm (spring basket)
Maximum rated voltage: 2000 V
p
Maximum crest factor: 6.5
A0335.1 Pin diameter: 8 mm
Maximum rated voltage: 2000 V
p
Maximum crest factor: 6.5
A37020A
O0120.1
ESG-400
ESG-410
*
A0335.1 UES-30
UES-40
ESG-400
ESG-410
*
A0101