18
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints. You can print a picture
with simple operations.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press the < button.
Printing starts.
When you are finished, disconnect the USB cable
from the camera with the picture selection screen
displayed.
Direct Printing (PictBridge)
< Button
Multi-Connector
USB Cable
Connector cover
OK
<
EASY PRINT START
PC
/
CUSTOM PRINT
d4312_e_basic_00_bookfile_7.book Page 18 Tuesday, December 27, 2005 4:13 PM
To Next Page
Loading...
