Unloading the Film
Self-Timer
5. When the film ends, rewind and remove it.
Close the Dust Barrier, depress the rewind release button and
rewind the film. When the crank turns freely, open the camera
back and remove the film in the shade.
Set the control lever to "SELF
TIMER" and release the shutter.
The beeper emits a tone and the
check lamp glows intermittently.
The
shutter
will
release
after
a
delay of about 12 sec. The lever
also serves as a camera support.
To stop the timer midway, return
the lever to its normal position.
10
To Next Page
Loading...
