3. Set the aperture lever to"Flash".
The charge lamp pops up and the
A11 turns on automatically.
The flash setting has been design-
ed to require a stronger pressure
than the aperture setting.
4. When the charge lamp glows,
you are ready to fire.
Do not move the lever once it
has been set for auto flash, or in-
correct flash exposure may result.
5. At the end of flash
photography, fully
depress the charge
lamp to turn the
flash unit off.
Maximum working
distance 2.5m (8.2
ft.)
at ASA
100,
5m
(16.4
ft.)
at ASA
400.
12
To Next Page
Loading...
