PRINTING THE DATE AND TIME
Choose the desired mode with the MODE
button.
The mode will switch in the described order by
pressing the MODE button.
The quartzdate uses the same power source as the main
unit. Make sure to correct the data after the battery is
replaced.
The data is imprinted in the lower right of the picture. If
there is something whitish or tinged with orange where
the data is imprinted, the data may be difficult to read.
The data may not be imprinted correctly on the frame(s)
after the specified final exposure of the film.
Month-day-year
Day-hour-minute
Year-month-day
No data
Day-month-year
48
To Next Page
Loading...
