6 EN
EN
INSTRUCTIONS
Thank you for purchasing this product. To
ensure your safety, please read this instruction
manual before use, and keep it handy for
future reference. This product is for use with
our company’s cameras only. For information
on compatibility and safe battery use, see your
camera manual.
Connecting the HLD‑10 (Fig. 1)
Inserting the Battery (Fig. 2)
Names of Parts (Fig. 3)
1 Front dial
2 Shutter button
3 F (Exposure
compensation)
button
4 ISO button
5 AF‑ON button
6 Rear dial
7 CHARGE lamp
8 Multi selector
9 Vertical shooting lock
0 Attachment wheel
a Terminal cover
Safety Precautions
• When the HLD‑10 is not attached, attach the
power battery holder (PBH) cover (a) to the
camera and the terminal cover to the HLD‑10.
• Make sure that the camera is turned o before
attaching or detaching the product.
• Use the specied batteries only. Failure to
observe this precaution could result in injury,
explosion, or product malfunction.
• Do not operate the attachment wheel with
your ngernails. Failure to observe this
precaution could result in injury.
• Use within the operating temperature
specied for your camera.
• Do not use or store this product in areas
exposed to high levels of dust or humidity.
• Thoroughly wipe any moisture o the product
before replacing the battery.
• Do not touch the contacts.
• Remove dirt from the contacts and other
areas with a soft, dry cloth. Do not use damp
cloths or thinner, benzene, or other volatile
cleaners.
• There is a risk of explosion if the battery is
replaced with the incorrect battery type.
• Never use lithium‑ion batteries in a low‑
temperature environment. Doing so may
cause generation of heat, ignition, or
explosion.
To Next Page
Loading...
Need help?
General