OMC AP35 - Page 9

Installaon, Operaon and Maintenance Manual ManA‐en Rev.03/2018
Page 9
OMC s.r.l. Via G. Galilei, 18 - 20060 - Cassina de Pecchi (MI) - ITALY - www.omcsrl.com - Tel.: (+39) 02.95.28.468
Our products are manufactured under ISO-9001 Quality Assurance System, approved by CSQ certified under no.9190.OMC2 - FIRST ISSUE 1994/08/04
ENGLISH
TYPE OF ACTUATOR
CONTROL SIGNAL
(psi)
VALVE STROKE
(mm)
DISTANCE “A” Pic.16
(mm)
AP23 / AM23
3÷15 20 mm 6 ÷ 7
6÷18 20 mm 5 ÷ 6
6÷30 20 mm 7 ÷ 8
15÷60 20 mm 8 ÷ 9
AP28 / AM28
3÷15 20 mm 6 ÷ 7
6÷18 20 mm 6 ÷ 7
6÷30 20 mm 4 ÷ 5
15÷60 20 mm 5 ÷ 6
AP34 / AM34
3÷15 20 mm 8 ÷ 9
6÷18 20 mm 11 ÷ 12
6÷30 20 mm 7 ÷ 8
15÷60 20 mm 12 ÷ 13
3÷15 30 mm 6 ÷ 7
6÷18 30 mm 9 ÷ 10
6÷30 30 mm 6 ÷ 7
15÷60 30 mm 9 ÷ 10
AP43 / AM43
AP44 / AM44
3÷15 20 / 30 mm 17 ÷ 18
6÷18 20 / 30 mm 17 ÷ 18
6÷30 20 / 30 mm 12 ÷ 13
15÷60 20 / 30 mm 1 ÷ 2
AP47 15÷60 35 mm 1 ÷ 2
AP45 15÷60 30 mm 1 ÷ 2
AP48
15÷60 50 mm 9 ÷ 10
15÷60 60 mm 1 ÷ 2
AP61 15÷60 50 mm 9 ÷ 10
AP63 15÷60 60 mm 1 ÷ 2
OP10 / OL10 90÷145 20 mm 9 ÷ 10
OP16 / OL16 90÷145 30 mm 9 ÷ 10
AP35 / AM35
TABLE 1