To Next PageTo Next Page
Need help?Do you have a question about the OMC AP23 and is the answer not in the manual?
General| Brand | OMC |
|---|---|
| Model | AP23 |
| Category | Controller |
| Language | English |
Defines the suitable application and operational context for the actuator.
Requirements for safe access and working platforms for actuator operation.
Importance of adequate lighting for safe work execution.
Precautions regarding pipe contents, including flammables and health hazards.
Considerations for hazardous environments like explosive areas or extreme temperatures.
Safety measures related to hot or cold surfaces during operation.
Assessing potential impacts of actuator operation on the overall system.
Procedures for safely isolating and depressurizing systems before maintenance.
Requirement to use appropriate tools and original spare parts for maintenance.
Selection of personal protective equipment based on identified hazards.
Mandates that all work must be done by skilled and trained personnel.
Guidelines for safe lifting and handling of actuators, considering risks.
Measures to protect products from freezing in low-temperature environments.
Awareness of other potential risks, such as hot surfaces during operation.
Compliance with local legislation for product disposal.
Details on connecting the control air supply to the pneumatic actuator.
Step-by-step instructions for separating the actuator from the valve.
Explains the functional difference between direct and reverse acting actuators.
Procedure for attaching a direct-acting actuator to its valve.
Procedure for attaching a reverse-acting actuator to its valve.
