Installaon, Operaon and Maintenance Manual ManA‐en Rev.03/2018
Page 2
Our products are manufactured under ISO-9001 Quality Assurance System, approved by CSQ certified under no.9190.OMC2 - FIRST ISSUE 1994/08/04
OMC s.r.l. Via G. Galilei, 18 - 20060 - Cassina de Pecchi (MI) - ITALY - www.omcsrl.com - Tel.: (+39) 02.95.28.468
ENGLISH
TABLE OF CONTENTS
1.0 SAFETY INFORMATION
1.01 INTENDED USE
1.02 ACCESS
1.03 LIGHTING
1.04 HAZARDOUS FLUIDS IN THE PIPE
1.05 ENVIRONMENTAL SITUATIONS
1.06 TEMPERATURE
1.07 SYSTEM
1.08 PRESSURIZED SYSTEMS
1.09 TOOLS AND CONSUMABLE PARTS
1.10 PROTECTION CLOTHES
1.11 QUALIFICATION OF OPERATORS IN CHARGE OF THE WORKS
1.12 HANDLING
1.13 FREEZING
1.14 OTHER RISKS
1.15 DISPOSAL
2.0 ACTUATOR CONNECTION
3.01 PNEUMATIC ACTUATOR CONNECTION
3.0 ASSEMBLY
3.01 VALVE/ACTUATOR SEPARATION
3.02 DIRECT ACTUATOR / REVERSE ACTUATOR
3.03 COUPLING TO THE DIRECT ACTUATOR’S VALVE
3.04 COUPLING TO THE REVERSE ACTUATOR’S VALVE
4.0 REPLACEMENT OF THE DIAPHRAGM
5.0 REPLACEMENT OF THE PISTON DISC
6.0 TIGHTENING TORQUES
7.0 AVAILABLE SPARE PARTS
To Next Page
Loading...