Why is the compressor not working on my Omega Altise Air Conditioner?
The compressor on your Omega Altise Air Conditioner may not be working because the compressor time-delay protection is activated. Wait for 3 minutes, then restart the machine after the temperature reduces.
Why does my Omega Altise OAPC10 Air Conditioner keep restarting?
Your Omega Altise Air Conditioner might be restarting frequently due to several reasons: * Direct sunlight: Try drawing the curtains. * Open doors and windows or heat sources: Close the doors and windows and move heat sources away. * Dirty filters: Clean or replace the filters. * Blocked air inlet or outlet: Remove any blockage.
What to do if my Omega Altise Air Conditioner doesn't turn on?
If your Omega Altise Air Conditioner isn't turning on, here are a few things to check: * Power: Ensure the unit is powered on. * Water level: If 'P2' is flashing or the water-full indicator is on, drain the water. * Timer: If the timer is on, turn off the machine for three minutes and then restart it.
General| Model | OAPC10 |
|---|---|
| Type | Portable Air Conditioner |
| Refrigerant | R410A |
| Cooling Capacity | 10000 BTU/h |
| Power Consumption | 1100W |
| Power Supply | 220-240V/50Hz |
| Operating Temperature | 35°C |
Details on how to position the air conditioner unit on a flat, dry surface.
Instructions for connecting the exhaust pipe and window seal plate.
Common issues and solutions related to exhaust pipe installation and airflow.
Identification of parts visible on the front of the unit.
Identification of parts visible on the rear of the unit.
List and identification of accessories provided with the air conditioner.
Instructions for operating the air conditioner using the remote control.
Guidelines for cleaning the air conditioner unit and its components.
Instructions for cleaning and maintaining the air filters.
Steps for preparing the unit for long-term storage or seasonal changes.
To Next Page
