Omega Technology OWLR325W

To Next Page

1. Build wireless connection

Here we set the example with Windows 7 to demonstrade

1.Click “Start-----Control Panel----Network and Internet----Network and Sharing

Center----Change adapter settings----Wireless Network Connection”，Right-Click

“Wireless Network Connection”，Choose“Connect/Disconnect”。

2. Choosing the wifi SSID of U25 in the wifi SSID list ,click “connect”

3. Type the network security key,click”OK”

Please noted that the default SSID and security key will be printed on the label on

the product

4. After getting through the passward, it will be showed “connected” ,which means

you are being successfully connected.

Need help?

Do you have a question about the Omega Technology OWLR325W and is the answer not in the manual?

Summary

Configure the device to operate as an Access Point, setting SSID and password.

Set up the device in Router mode, including connection type and host name.

Configure the device for Repeater or Repeater WISP operation, including SSID selection.

Configure the device to operate as a Client or Client WISP.

Instructions on how to reset the device to its default settings.

Steps to resolve issues when a laptop cannot detect the WiFi signal.

General